Malachite DSP SDR Receiver 50KHz-2GHz Malahit DSP SDR Shortwave Radio Receiver

$115.62 (-40%)

138

  • Item must be returned within: 30 Days
  • Supported Modes: AM, LSB, AM, NFM, WFM
  • Band: AM
  • Model: DSP SDR
  • Condition: New
  • MPN: Does Not Apply
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Color: Black
  • Return shipping will be paid by: Buyer
  • Type: SDR Receiver
  • Audio Outputs: Type-C
  • Brand: Unbranded
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Frequency Band(s): 50KHz ~ 2GHz
  • 50KHz
    to
    2GHz
    Malachite DSP SDR Receiver
    ,3.5” Malahit SDR Shortwave Radio Receiver Shell
    Package Included:
    – 1 x Set of SDR Receiver (with Aluminum Alloy Shell)
    Advantages:
    1. 3.5 inch capacitive screen
    2. 2-layer board structure, higher performance
    3. Adopt a sound unit, 2 vibrating chambers, the speaker
    (Only one s
    peaker
    )
    comes with a sound chamber, the bass sound quality is very full(
    Adjustable sound
    )
    Features:
    – DSP SDR Receiver for Malahit
    – Capacitive touch screen
    – Stlink V2 System
    – Default frequency range: 50KHz-2.0GHz
    – Demodulation mode: AM, LSB, AM, NFM, WFM,(CW, MIN SNR)
    Product Parameters:
    1) The radio is built on the principle of SDR-the function is determined by loaded software;
    2) Frequency range: from 50KHz to 2.0GHz (
    Registered version
    )
    (
    No signal between 250-400MHz
    )
    3) All types of analog modulation: AM, LSB, NFM, WFM; (CW, MIN SNR)
    4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, for Noise Blanker, AGC, equalizer;
    5) fully functional chip msi001;
    6) The powerful stm32H 743VIT6 with a clock frequency of 480 MHz is applied;
    7) 3.5-inch display touch screen;
    8) Controls: 2pcs; encoders with buttons and touch screen;
    9) It is powered by an external TYPE-C interface or battery (Built-in battery 3.7V 3800ma ), which can be charged by TYPE-C.
    10) Consumption: 300mA when listening to headphones;
    11) The reception on built-in telescope or external antenna is to improve the HF reception on telescope antenna, and an additional board with source follower has been developed. The board will be built into standard receiver design.
    12) Connect to computer via USB, which can transfer CAT, IQ and audio.
    13) 160 kHz span, with scalability;
    14) Sensitivity: Under the condition of up to 250MHz, s/w is 0.3μV = 10dB; due to lack of measurement equipment, so the above measurements were not taken;
    15) Due to the characteristics of msi001 chip used, dynamic blocking range is about 85dB.
    16) With backlight control;
    17) SMA female antenna socket;
    18) Size:102
    x 72
    x 22mm
    ;
    How To Turn ON/OFF?
    ·
    Power on:
    press once
    ,
    ·
    Standby state: press once,
    ·
    Power off
    :
    Long Press and hold until you hear a “dididi” sound
    .
    On Jan-18-21 at 18:30:31 PST, seller added the following information:

    Main Menu

    Malachite DSP SDR Receiver 50KHz-2GHz Malahit DSP SDR Shortwave Radio Receiver