NESDR SMArt Premium USB RTL-SDR w/ 0.5PPM TCXO, Metal Case, SMA. R820T2 RTL2832U

Welcome to NooElec @ eBay!
eBay Store
Coupons
Return Policy
Shipping Policy
Payment Policy
Product Details
Manufacturer
Nooelec
Model
NESDR SMArt
NooElec SKU
100701
Quantity
1pc NESDR SMArt SDR w/ brushed aluminum enclosure
Technical Details
Installation Guide & Software
RTL-SDR Project
RTL-SDR Subreddit
Applications
Software defined radio, DVB-T, ADS-B
Interface IC
Realtek RTL2832U
Tuner IC
Rafael Micro R820T2
Clock Accuracy
0.5PPM (max)
Instantaneous Bandwidth
2.4MHz (nominal); 3.2MHz (max)
Frequency Range
25MHz-1700MHz (nominal)
Antenna Input
Female SMA
Dimensions (SDR only)
17mm x 14mm x 65mm
Product Information
You spoke, we listened! This premium RTL-SDR was
designed, developed and fabricated by NooElec in the USA and Canada
in order to implement a wide array of feature requests.
The NESDR SMArt contains the same
ultra-low phase noise 0.5PPM TCXO
used in our much smaller Nano 2+ (TCXO specifications below), ensuring ultimate tuning stability in nearly any environment
In the quest for lower noise, the power supply section was redesigned to implement an RF-suitable voltage regulator with
under 10 µVRMS of noise
. That is at least 10x lower than other designs!
A quality shielded inductor was used in the power supply to improve EMI rejection
The
included aluminum enclosure
ensures stray EMI stays where it belongs–away from the sensitive RF circuitry
Lower board-level temperatures
further improves the SDR noise floor
Temperature improvements
A custom heatsink is affixed to the primary PCB with 3M thermal adhesive
, to wick heat away from the circuit board and towards the enclosure
2 separate silicone thermal pads
spread the rest of the heat away from the device hot spots.
Power consumption has been reduced by an average of 10mA, which means less heat is generated compared to other designs
The result is much lower board-level temperatures–increasing stability, improving sensitivity and ensuring maximum frequency range capability. The changes were first simulated, and then field-tested with a Flir E8
Form factor improvements
The NESDR SMArt was
designed to minimize annoying USB port occlusion
. We re-designed the SDR from the ground up to ensure the SMArt
can be used side by side in any USB-compliant device
, including tightly-spaced embedded devices. There is no need to remove the enclosure to run multiple SDRs beside one another!
The form factor re-design allowed us to move to the more
universal SMA antenna input
Included
NESDR SMArt SDR w/ brushed aluminum enclosure
2 year manufacturer warranty
SDR Clock Specifications
Frequency stability: 0.5PPM (max)
Phase noise @1kHz offset: -138dBc/Hz (or better)
Phase noise @10kHz: -150dBc/Hz (or better)
Phase noise @100kHz: -152dBc/Hz (or better)
SDR Features
RTL2832U Demodulator/USB interface IC
R820T2 tuner IC
0.5PPM, ultra-low phase noise TCXO
RF-suitable voltage regulator
Shielded primary inductor
Integrated custom heatsink
Female SMA antenna input
High-quality black brushed aluminum enclosure
Through-hole direct sampling pads on PCB